https://www.pandapodium.cc/product/exs-fk-01-integrated-fork
This fork is specifically made for Giant TCR. Please check the dimensions and recommend bearing size below Note: Contact us before order FK-01 Steerer Tube Diameter: 31.8mm RAKE: 45mm Fork Length: 370mm Brake mount: Flat mount Axle Compatibility: 12100mm(axle is not included) Weight: 370g Max Tire Size: 32mm
Enter the FK-01 integrated fork With the rise of full internal cable routing becoming the current standard in the cycling industry, there's a growing need for solutions that can adapt to partially internally routed frames. Go fully integrated The FK-01 fork addresses the concerns of normal fully integrate by increasing the steerer tube diameter to 31.8mm and D-shaped design con bind together. Through the use of carbon fiber one-piece molding technology and reinforcement design, it achieves increased strength and rigidity without adding extra carbon layers to the steerer tube, thus reducing weight and maintaining the desired strength. With the thicker steerer tube, some models can use a standard, non-offset top cap when paired with a small-sized headset and our dedicated lightweight compression plug, allowing your bike for a more aesthetically pleasing build. Fork Geometry and Recommend Bearing Size Stiffness/Rigidity Comparison With the thicker steerer tube, some models can use a standard, non-offset top cap when paired with a small-sized headset and our dedicated lightweight compression plug, allowing your bike for a more aesthetically pleasing build.